Edwards E2M30 Vacuum Pump

Product Information

Hey there, lab enthusiasts! Meet the Edwards E2M30 Vacuum Pump - a powerhouse in the lab that offers a unique dual mode, enabling the configuration of the pump for very high gas loads without compromising vacuum. This pump is a must-have for centrifugal concentrators, rotary evaporators, freeze dryers, gel dryers, vacuum ovens, and general-purpose requirements. Please note, the unit is being sold AS-IS and requires a motor. Its large, clearly marked, easily accessible controls make operation a breeze. With a quiet 48dBA noise level, it's undeniably the quiet achiever of the lab. The fast-acting inlet valve prevents oil and gas suckback in case of power or oil pressure loss. The pump includes NW25 inlet/outlet connections and offers high vacuum or high throughput from the same pump. The versatile vacuum pump presents easily selectable modes, from high vacuum to high throughput. It also boasts an adjustable gas ballast control to maximize vapor handling capability. With three user-selectable gas ballast positions, it meets most vapor handling requirements. You can navigate between high vacuum and high throughput modes effortlessly. The pump's gas ballast is delivered into the pump to prevent condensation of vapor carried by pumped gases. This all-inclusive set is the real deal, with a maximum pressure of 1.5 x 10^-3 mbar, a horsepower of 0.5 hp, and electrical requirements of 115 V 50/60 Hz. The pump operates at a noise level of 48 dB (A) with a flow rate of 76 L/min. Plus, it includes the pump, a 2m electrical supply cable, inlet screen, Ultragrade 19 Oil, and a lifting bracket.

• Easily configurable dual mode for high gas load handling without compromising vacuum
• Quiet operation at only 48dBA
• Fast-acting inlet valve to prevent oil and gas suckback during power or oil pressure loss
• Selectable high vacuum and high throughput modes
• Gas ballast control for maximized vapor handling capability
• Delivered gas ballast to prevent condensation of vapor carried by pumped gases
• Maximum pressure of 1.5 x 10^-3 mbar and horsepower of 0.5 hp
• Operates at 115 V 50/60 Hz with a noise level of 48 dB (A) and a flow rate of 76 L/min
• Includes pump, 2m electrical supply cable, inlet screen, Ultragrade 19 Oil, and a lifting bracket

• Maximum Pressure: 1.5 x 10^-3 mbar
• Horsepower: 0.5 hp
• Electrical Requirements: 115 V 50/60 Hz
• Noise Level: 48 dB (A)
• Flow Rate: 76 L/min
• Voltage: 115 V
• Includes: Pump, 2m electrical supply cable, inlet screen and Ultragrade 19 Oil, lifting bracket

Metric: 29.484 kg
Imperial: 65.0 lbs

Metric: 18.0 cm x 7.0 cm x 16.0 cm
Imperial: 7.09 in x 2.76 in x 6.3 in

8414109035

This code covers the vacuum pumps; air or other gas compressors. The code was chosen based on the product make, model, and intended use, complying with the international harmonized system.