Thermo Scientific UltiMate LPG-3400SD Standard Quaternary Pump

Product Information

Are you ready to pump up the volume on your lab's analytical LC applications? Look no further than the UltiMate LPG-3400SD Standard Quaternary Pump by Thermo Scientific! This highly flexible pump provides an unbeatable degree of choice in solvent proportioning and mixing, with support for up to four solvents. Operating at pressures of up to 62 MPa and flow rates of 10mL/min, it excels in standard LC applications and offers full compatibility with fast UHPLC separations. It's primed to revolutionize method development, analytical research, and routine analysis in pharmaceutical, food and beverage, and environmental industries. You can't overlook its support for short sub-2m particle columns for faster analysis while consuming less solvent. But wait, there's more! The UltiMate 3000 SD comes with Serial dual-piston operating principle, low-pressure gradient proportioning, and wide operating flow rate range from 200L/min. to 10mL/min. Not to mention the SmartFlow technology to automatically compensate for compressibility. You'll especially appreciate the Thermo Scientific SpinFlow mixing volumes that perfectly balance gradient delay volume with mixing efficiency. The internal four-channel micro membrane degasser ensures reliable vacuum degassing, and the active rear-seal wash maximizes seal lifetime and pump uptime. Join the scientific revolution with the UltiMate LPG-3400SD Pump!

• Support for up to four solvents for convenient method development and system flushing
• Operating pressure of up to 62 MPa and flow rates of up to 10mL/min
• Serial dual-piston operating principle and low-pressure gradient proportioning
• SmartFlow technology to automatically compensate for compressibility
• Thermo Scientific SpinFlow mixing volumes for perfect balance of gradient delay volume with mixing efficiency
• Reliable vacuum degassing with an internal four-channel micro membrane degasser

• Min. Flow Rate: 0.001 mL/min (Recommended 0.2 mL/min)
• Max. Flow Rate: 10.0 mL/min
• Pressure Range: 62 MPa
• No. of Eluent Lines: 4
• Proportioning Accuracy: 0.5% (full scale)
• Proportioning Precision: <0.15% SD
• PC Connection: USB hub with 3 sockets integrated
• Frequency: 100-120 V, 60 Hz; 200-240 V, 50 Hz
• Flow Precision: <0.05% RSD or <0.01 min SD, whichever is greater

Metric: 49.995454545 kg
Imperial: 110.231 lbs

Metric: 40.0059962 cm x 50.00727 cm x 15.0093976 cm
Imperial: 15.748038 in x 19.68505 in x 5.9055126 in

841381

Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. This code represents the category of 'Pumps for liquids' and is justified based on the product being a liquid pump used in laboratory and industrial settings.