AMETEK Powervar Global Power Interface (GPI) Series 2000 Power Conditioner - Used

Product Information

The AMETEK Powervar Global Power Interface (GPI) Series 2000 Power Conditioners are the ultimate saviors of three-phase electronic systems within a variety of industries. Incorporating a low impedance isolation transformer, surge diverter, and power line filter, the GPI Series 2000 provides clean, noise-free power, shielding your equipment from electric havoc. Crafted with elegant scientific precision and affectionately known for their capacity to protect, these power conditioners stand as a testament to the enduring power of human ingenuity, guaranteeing a sanctuary of enduring safety for your lab's most prized systems. The exceptional AMETEK Powervar GPI Series 2000 ensures that your equipment is well-guarded and forever ready to operate at peak performance. From CDC facilities to cutting-edge research labs, these power conditioners stand as stout defenders against the onslaught of electric calamity, allowing crucial experiments, calculations, and analyses to proceed unimpeded. Each GPI Series 2000 comes fully equipped with an arsenal of safety interlocks, emergency machine off (EMO), casters, and lockout/tagout breakers, as essential as the guardians of a noble citadel. Fashioned with sturdy materials, including copper transformer wires, insulating Class H materials, and 14 mil. silicon iron cores, these powerhouses undergo rigorous standards to guarantee their RoHS compliance and unwavering efficiency. Nurturing a transformative input voltage of 208/240/480/600 Delta connection (4 wire) into a secure output voltage of 208/120 wye (5 wire), the GPI Series 2000 boasts a continuous capacity of 15 kVA and a stouthearted efficiency that surges beyond 97% at full load, preserving the delicate balance of power needed for your vital experiments. Partnering with the GPI Series 2000 is a decision no scientist will ever regret as the indomitable power transformers minimize eddy currents, reduce external magnetic fields to negligible levels, and function with a noise rejection capacity that borders on the realm of supernatural. Prepare to be dazzled and fortified by the GPI Series 2000's capacity to withstand up to 6000 volts @ 3000 amp ringwave and unipolar impulse, a feat that lays bare the power conditioner's readiness to shield your lab's most precious equipment with the armor of security. The AMETEK Powervar Global Power Interface (GPI) Series 2000 - safeguarding labs, empowering scientists, and sparking innovation.

• Low Impedance Isolation Transformer
• Surge Diverter and Power Line Filter
• Safety Interlocks
• Emergency Machine Off (EMO)
• Casters
• Lockout/Tagout Breaker
• RoHS Compliant
• Input Voltage: 208/240/480/600 Delta Connection (4 wire)
• Output Voltage: 208/120 wye (5 wire)
• Continuous Capacity: 15 kVA
• Efficiency: > 97%

• Input Voltage: 208/240/480/600 Delta Connection (4 wire)
• Output Voltage: 208/120 wye (5 wire)
• Continuous Capacity: 15 kVA
• BTU/Hr. Output: 1536
• Efficiency: > 97% (at full load, unity power factor)
• Step Load Change: + 0.8% (at unity power factor)
• Noise Rejection: With unit under power and the isolation transformer configured for a transformation ratio of 1:1 and with an ANSI/IEEE C62.41, Category A pulse applied either normal mode or common mode at the input, the noise output voltage will be less than 10 volts normal mode and less than .5 volts ( of one volt) common mode in all four quadrants (CM-NM, NM-NM, CM-CM, NM-CM)
• Surge Voltage Withstand: Tested under power to ANSI/IEEE C62.41, Category A & B (formerly IEEE587-1980). Power conditioner tested to withstand up to 6000 volts @ 3000 amp ringwave and unipolar impulse
• Construction Materials: Transformer wires are copper and insulated with Class H materials. Windings are insulated with Nomex paper insulation before vacuum varnishing. Internal wiring is a minimum of 200 degree C rated and sleeved with Class H materials. Grain oriented silicon iron cores are constructed using 14 mil. laminations interleaved one to one. Eddy currents are minimized and external magnetic fields are below 0.1 oersted (at 12 inches distance in any direction). Unit is RoHS compliant

Metric: 313.974 kg
Imperial: 692 lbs

Metric: 40 cm x 26 cm x 36 cm
Imperial: 15.75 in x 10.24 in x 14.17 in

8504408525

Power supplies for automatic data processing machines or units thereof, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units