Powervar GPI Series 2000 15 kVA Transformer

Product Information

The Powervar GPI Series 2000 is a 15 kVA power conditioner designed to eliminate high-frequency noise and high-voltage impulses (also known as spikes or surges) from the AC power that runs electronic equipment. The power conditioner provides protection for all transformer phases in a large system. It contributes to the profitability of businesses by ensuring reliable operation of sophisticated electronic systems. The GPI Series 2000 offers benefits such as fewer hardware failures, less system downtime, and longer equipment life. This used Powervar GPI Series 2000 Transformer is still operating as intended and has been maintained in very good condition.

• 15 kVA continuous capacity
• BTU/Hr. output of 1536
• Efficiency > 97% at full load, unity power factor
• Sophisticated noise rejection

• Continuous Capacity: 15 kVA
• BTU/Hr. Output: 1536
• Efficiency: > 97% (at full load, unity power factor)
• Step Load Change: + 0.8% (at unity power factor)
• Noise Rejection: With unit under power and the isolation transformer configured for a transformation ratio of 1:1 and with an ANSI/IEEE C62.41, Category A pulse applied either normal mode or common mode at the input, the noise output voltage will be less than 10 volts normal mode and less than .5 volts ( of one volt) common mode in all four quadrants(CM-NM, NM-NM, CM-CM, NM-CM)

Metric: 293.01 kg
Imperial: 646 lb

Metric: 31 cm x 18 cm x 26 cm
Imperial: 12.2 in x 7.1 in x 10.2 in

85043180

The harmonized code 85043180 is for static converters, with a power handling capacity not exceeding 5 kVA, suitable for use in systems where the input voltage is greater than the output voltage. This is applicable to the Powervar GPI Series 2000 15 kVA Transformer due to its power conditioning and voltage regulation capabilities.