Memmert IPP110 plus, Peltier-cooled-incubator

Name: Memmert IPP110 plus, Peltier-cooled-incubator
Brand: REUZEit Inc
SKU: 7000569
Price: 2942 USD
Availability: OutOfStock

sku: 7000569

Out Of Stock

Condition : Pre-owned

Warranty : 30-Day Warranty, 100% Parts and Labor

Region : EU

$2,942.00

Apply For Finance

Make Offer

Enquiry Here

IPP110 plus

Microbiology, zoology, food, cosmetics or pharma industry: the energy-saving cooled incubator with Peltier elements heats up and cools down seamlessly in one system.

Setting temperature range	0 to +70 °C
Working temperature range	with light: +10 to +40 °C
Working temperature range	without light: from 0 (at least 20 below ambient temperature) to +70°C
Setting accuracy temperature	0.1 °C
Temperature sensor	1 Pt100 sensor DIN class A in 4-wire-circuit

Language setting	German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT	SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer	Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT	the process time does not start until the set temperature is reached
Calibration	three freely selectable temperature values
adjustable parameters	temperature (Celsius or Fahrenheit), programme time, time zones, summertime/wintertime

Convection	forced ventilation by Peltier fan

Documentation	programme stored in case of power failure
Programming	AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Temperature control	adjustable electronic overtemperature monitor and mechanical temperature limiter
Autodiagnostic system	for fault analysis

Peltier	energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)

Works calibration certificate	for +10°C and +37°C
Door	fully insulated stainless steel door with 2-point locking (compression door lock)
Door	inner glass door
Internals	2 stainless steel grid(s), electropolished

Dimensions	w_(A) x h_(B) x d_(C): 560 x 480 x 400 mm (d less 10 mm for fan - Peltier)
Volume	108 l
Max. number of internals	5
Max. loading of chamber	150 kg
Max. loading per internal	20 kg

Dimensions	w_(D) x h_(E) x d_(F): 745 x 864 x 656 mm (d +56mm door handle)
Housing	rear zinc-plated steel

Voltage Electrical load	230 V, 50/60 Hz approx. 550 W
Voltage Electrical load	115 V, 50/60 Hz approx. 550 W

Set Up	The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Ambient temperature	16 ºC to 40 ºC
Humidity rh	max. 70 %, non-condensing
Altitude of installation	max. 2,000 m above sea level
Overvoltage category	II
Pollution degree	2