Dionex UltiMate 3000 Quaternary Rapid Separation Pump

Product Information

The Dionex UltiMate LPG-3400RS Rapid Separation Quaternary Pump by Thermo Scientific is a dynamic instrument offering unparalleled solvent proportioning flexibility, with the ability to support up to four solvents at 15,000 psi while maintaining an operating flow rate of 200L to 8mL/min. Some practical applications in the pharmaceutical, food and beverage, and environmental industries include method development, routine research applications, and simple method transfer between UHPLC and standard LC pump configurations.

• Serial dual-piston operating principle with low-pressure gradient proportioning
• Wide operating flow rate range from 200L to 8mL/min. with high flow rate accuracy
• Supports operating pressures up to 100MPa (15,000 psi/1000 bar)
• SmartFlow technology for automatic compensation for compressibility, eliminating the need for manual solvent setting
• Reliable vacuum degassing with an internal four-channel micromembrane degasser
• Active rear-seal wash to maximize seal lifetime and instrument uptime

• Flow Accuracy: 0.1%
• Flow Precision: <0.05% RSD or <0.01 min SD, whichever is greater
• Gradient Formation: Low-Pressure Proportioning
• Max. Flow Rate: 8 mL/min.
• Pressure Range: 2 to 103.4 MPa up to 5 mL/min; 2 to 80 MPa up to 8 mL/min
• Type: Serial Dual-Piston Quaternary Rapid Separation Pump
• Emission Sound Pressure Level: <70 dB(A) in 1-m-distance
• For Use With (Equipment): 15-Pin D-Sub Connector for Solvent Rack/Degasser Connection
• Gradient Delay Volume: 325-1840 L (Depending on the SpinFlow mixer configuration)Default: 690 L
• I/O Interfaces: 2 digital inputs, 2 relay outputs
• Min. Flow Rate: 0.001 mL/min. (Recommended: 0.1 mL/min.)
• No. of Eluent Lines: 4
• Operating Principle: Serial dual-piston
• PC Connection: USB for PC connection, USB hub with 3 sockets integrated
• Pressure Ripple: Typically: <0.2 MPa or <1% whichever is greater
• Proportioning Accuracy: 0.5% (full scale)
• Proportioning Precision: <0.15% SD
• Solvent Degassing: Built-in, 4 channels

Metric: 13.00534646 kg
Imperial: 28.66006 lbs

Metric: 20.078751 cm x 16.141741 cm x 6.299216 cm
Imperial: 7.91776309 in x 6.359828471000001 in x 2.480787424 in

841381

The Harmonized Code for the Dionex UltiMate 3000 Quaternary Rapid Separation Pump falls under the category of Pumps for Liquids, with built-in or installed meters, having a specific maximum flow rate exceeding 140L/min but not exceeding 1300L/min.