PHCbi MCO-170AICUVL-PA Incubator CO2 Incubator 170 L UV HEPA IR 5-50 C 115V 60Hz
phcbi
Details
-
CategoryIncubator / Oven / Inc Shaker
-
Dimension30.0in x 26.0in x 36.0in
-
Serial230160079
-
Shipping TypeFreight
-
ManufacturingDoes Not Apply
-
Voltage / HertzDoes Not Apply / Does Not Apply
Description
PHCbi MCO-170AICUVL-PA CO2 incubator, 170 L capacity, with SafeCell UV and in-chamber HEPA filtration for contamination control. This listing covers one incubator from a stacked pair; only a single unit is included. The MCO-170AICUVL-PA features direct heat with air jacket, an infrared CO2 sensor for stable control, and an InCu saFe copper-enriched stainless steel chamber designed to inhibit microbial growth and simplify cleaning. Typical operating range is 5 C above ambient to 50 C with up to ~95 percent RH via water pan, and 0 to 20 percent CO2 for cell culture. Condition Class E (Excellent): near-new with little use, functioning as described, minimal cosmetic wear, not formally refurbished or validated. Country of origin: United States. Includes a power/data cable; standard power cord is not listed as included. Serial number: 230160079. Backed by a 30-day warranty on part from REUZEit, supporting reliable, sustainable reuse for life science labs.
Key Features
- 170 L (approx. 6.0 cu ft) CO2 incubator for cell and tissue culture
- SafeCell UV lamp continuously treats recirculating air and humidity pan
- In-chamber HEPA filtration helps maintain ISO Class 5 clean air conditions
- InCu saFe copper-enriched stainless steel chamber resists contamination
- Direct heat with air jacket for fast, uniform temperature recovery
- Infrared CO2 sensor for stable, humidity-independent CO2 control
- Temperature range approx. ambient +5 C to 50 C; CO2 range 0 to 20 percent
- High humidity operation via water pan (up to about 95 percent RH)
- Stackable design; heated inner glass door and outer door for stability
- Audible/visual alarms for temperature and CO2; data-friendly digital controls
Specifications
- Make and model: PHCbi MCO-170AICUVL-PA CO2 incubator
- Capacity: 170 liters (about 6.0 cubic feet)
- Temperature control range: approximately ambient +5 C to 50 C
- Temperature performance: designed for tight control and uniformity suitable for cell culture (manufacturer literature cites high uniformity and rapid recovery)
- CO2 control range: 0 to 20 percent; IR (NDIR) CO2 sensor for stable regulation
- Humidity: high humidity operation via water pan, up to approximately 95 percent RH
- Contamination control: SafeCell UV lamp treats recirculating air and water pan; InCu saFe copper-enriched stainless steel interior; in-chamber HEPA filtration targeting ISO Class 5 air
- Interior: seamless, coved corners to simplify cleaning; adjustable shelving (quantity/configuration may vary)
- Door system: heated tempered glass inner door; insulated outer door with heater for condensation control
- Controls and display: microprocessor PID control with digital readouts; setpoint and alarm management
- Alarms and safety: over/under temperature, CO2 deviation, power interruption, door ajar; audible and visual indicators
- Electrical: 115 V, 60 Hz, North America configuration (-PA)
- Typical applications: cell and tissue culture, microbiology, stem cell and regenerative medicine, IVF, GMP support labs, drug discovery
- Condition: E (Excellent); near new, minimal cosmetic wear; not refurbished or formally validated
- Included: one incubator unit from a stacked pair; power/data cable present (standard power cord not listed as included); no computer
- Serial number: 230160079
- Country of origin: United States
- Actual dimensions (approx.): 30 x 26 x 36 in (76.2 x 66.0 x 91.4 cm)
- Actual weight (approx.): 200 lb (90.7 kg)
- Shipping dimensions (approx.): 36 x 31.2 x 43.2 in; ship weight about 240 lb
- Warranty: 30-Day Warranty On Part from REUZEit
- Notes: Specifications reflect typical PHCbi literature for the MCO-170AICUV series; buyers should verify critical parameters for specific workflows
Weight
Imperial: 240.0 Pounds
Metric: 108.86 Kilograms
Shipping Dimensions
Imperial: 36.0 lb x 31.2 lb x 43.2 lb
Metric: 91.44 cm x 79.25 cm x 109.73 cm
Harmonized Code
8419.89
Harmonized Code Details
8419.89 - Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, other. A laboratory CO2 incubator heats and controls atmosphere for cell growth, fitting this provision.
Comments 0
There are currently no public comments.